Steel Fiber Manufacturers in India

The rule of thumb says that small fibers tend to be used where the control of crack propagation is highly important when it comes to the design consideration. The number of fibers per kilogram that is often refered as the fiber counts permits the distribution of steel reinforcement. In simple words, high fiber counts shall permit finer distribution of steel fiber reinforcements throughout the matrix. Consequently, there are greater crack control witnesses during the drying process. In contrast to this, as they exhibit better matrix anchorage at high deformations, they tend to exhibit better post-crack strength. It is for this reason that steel fibers play an important role in many applications of the construction and infrastructure industry. Among a large number of steel fiber manufacturers existing in India, Precision Drawell Pvt. Ltd. stands apart and has created a stern position for itself in this area. The team of experts here are dedicated to manufacturer steel fibers and se

Three arched bridge on the George-Knysna road is one of the first true reinforced concrete mass structure in South Africa. Although it is not credited as the earliest examples of steel fibre construction technique but is based on the construction of steel girders buried in the mass concrete. The Wagon Bridge in 1907 was the first of its kind structure that was built from the reinforced concrete. However, this marked a new beginning in the construction industry of South Africa, which has since then begun an era of such novel construction technique. Precision Drawell Pvt. Ltd. is one such exporter and supplier of steel reinforced concrete in South Africa. The company is dedicated to provided valued products in the international marketplace at the best prices on an appropriate foundation. The use of fibers in the construction of Clearwater Corporate Office Park Project in Gauteng's East Rand was the first of its kind experience. The steel fibers used were an integral part

Cold Heading Wires (CHQ wires) are a creation of hot and cold processes that are needed to best suit for the creation of other cold headed parts that serve the purpose of its body. The wire must suit to cold processing and the final use for the finished part. Cold heading wires have vast and variable applications in transport, building, chemical, electronics, aerospace, and marine industries. Thus, realizing that it has such critical usage, the material used for its manufacturing forms the most crucial concern. This is also because the finished performance of the wire shall reflect the initial properties and integrity of the wire. Precision Drawell, a unit of Khandelwal Group has been committed to the manufacturing of different grades of steel wire and wire products since 1985. It also manufactures CHQ wires for applications in infrastructure and engineering industries. Cold heading process is the process of altering initial steel blanks into a finished product through force

Steel fibers are filaments of wire, which is deformed and cut into pieces, for reinforcement of concrete, mortar, and. Addition of steel fibers to concrete actually transforms a relatively brittle material into a ductile one. The key factors that decide the proportions of steel fibers in the mix design depend upon the physical properties required in the project. Therefore, it is important to look at the few steel fiber properties : Steel fibers are evenly distributed throughout a given cross section. However, reinforcing bars or wires are provided only according to their requirement. Steel fibers are relatively short. Small fibers tend to have greater control of cracks. This is an important consideration in designing the mix. Steel fibers are typically added to concrete in low volume dosage. The dosage is often as low as 1%. But, it has been proved to be effective in reducing plastic shrinkage cracking. The distribution of steel fiber reinforcement is provided b